May 252018

Having an extra set of beading tools that you can easily bring with you is a great idea.

There have been a few occasions when friends or family members had jewelry that I could have easily adjusted or repaired for them, if only I’d had my pliers with me.

ff inexpensive tools & beads cover

This inexpensive set comes with its own carrying case and is easily tucked into a purse or car glove box. 

Of course, at under $20 for 10 tools, you can’t expect them to be top quality, but they do get the job done. 

In today’s video I’ll go through everything you get in the set, demo a few of them and talk about ways I might use each of the tools.

Speaking of inexpensive jewelry supplies, I am also reviewing a set of 60 large hole beads with accompanying bracelet. At $15 for 60 beads, they are quite the bargain!

Watch today’s video for the details and my honest opinion on all these products.

In case you missed it last week:

As a special favor to my email newsletter readers BeeBeeCraft is offering $6 off your order of $15 or more to the first 25 people to use the coupon code: SANDY6

(This offer is good until July 15, 2018.)

Hope you find the video helpful. Happy creating!

Watch the Inexpensive Jewelry Making Tools & Large Hole Beads-Are They Worth It? Review-Friday Findings video at YouTube.

These products were provided to me for free for review purposes; however, BeeBeeCraft has no control over my content and I was not paid for the review.  The opinions shared are my own honest views.

Jul 202015

pink sparkles earrings

We often use these large hole beads in bracelets and sometimes in necklaces but not very often in earrings. This is a fun way to display just a couple of pretty sparkly large hole beads.

Choosing large enough spacers to snugly fit into those large holes and then careful wire wrapping holds everything in place. Little bits of  chain makes them dangle nicely.

Enjoy the video and happy creating!

You can watch the Pink Sparkles Earrings Video Tutorial over at YouTube.


  • 2 4-inch pieces 20 gauge wire
  • 2 3-inch pieces fine chain
  • 4 6mm spacer beads
  • 2 13mm large hole beads
  • 2 ear wires


  • round nose pliers
  • two pairs chain nose pliers
  • wire cutters


  1. Use chain nose pliers to grasp wire 1 1/2 inches from one end.  Bend wire at 90° angle.
  2. Grasp bend with round nose pliers and wrap wire around pliers as far as possible to start to make a loop.  Reposition pliers to finish loop.  Slightly twist loop open and insert end link of one of the pieces of chain. Close loop and hold with chain nose pliers. Use another pair of chain nose to make 2-3 wraps with wire around wire below 90° bend. Use wire cutters to trim, if necessary. Use chain nose pliers to tuck in end.
  3. Slide onto wire a spacer bead, large hole bead and a spacer bead. Grasp wire with chain nose pliers and make a 90° bend 1/8-inch from spacer bead.
  4. Repeat step 2 to make another wrapped loop, inserting other end link of chain into loop before wrapping. Final wraps should sit snugly against spacer bead, holding spacers in place in holes of large hole bead.
  5. If you like, gently curve up ends of wrapped loops.
  6. Find center link of fine chain and insert loop of ear wire. If needed use chain nose pliers to twist loop of ear wire so earring faces front.
  7. Repeat to make second earring.